Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars

$600.00
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory.
AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference.
LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made.
FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar.
- Aerodynamically engineered to save 4 watts vs a traditional aero road bar
- Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts
- Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm)
- Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops
- Stem Angle: 6-Degrees
- Steer Clamp Diameter: 31.8
- Weight: 310 grams (100mm x 420mm)
- Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible)
- Compatible with Roval bolt on computer mount, S219900058.
- System Weight Limit: 275lbs/125kg

$314.00
Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross.
- Aerodynamic integrated Cable Routing (ACR)
- Full carbon handlebar is designed for Adventure, Gravel and Cyclocross
- Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics
- Flared drops for better control and clearance when descending
- Bar Clamp Diameter: 31.8mm
- 115mm drop, 76mm reach
- 12° outward bend
- 10° forward angle
- 25mm offset drops
- 5mm rise
- 205 grams (420mm)

$300.00
Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge.
- Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar
- Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at
225g (size 42cm)
- Innovative features, like textured tops and a smooth bar tape step, enhance your
experience
- Bend: 125mm drop x 75mm reach

$296.00
Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar.
- Updated distinctive Zipp cosmetics
- Unidirectional carbon built for stiffness, comfort, and light weight
- Flattened top shape with 3° backsweep for comfort
- Variable radius drop for multiple hand positions and deeper movement into the drop.
- Lifetime warranty

$294.99
- Full UD carbon construction aero road handlebar
- Flattened top section for aerodynamic advantage and enhanced comfort
- Fully integrated internal cable routing
- Compatible with all mechanical/hydraulic brake systems and mechanical/electronic shift systems
- 270g weight in 420mm width
- ISO-Road safety certified
- Clamp Size: 31.8mm
- Rise / Reach: 85mm
- Upsweep / Drop: 130mm

$259.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g

$259.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g

$242.00
With its unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of our compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights. The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip.
- Aerodynamic Integrated Cable Routing (ACR) compatible
- Semi-integrated Cable Routing (SCR) compatible
- Continuous UD carbon Monocoque construction
- Reinforced and textured clamping areas
- 120mm wide round center section makes it easy to mount accessories
- New internal cable routing options for Di2
- Bar Clamp Diameter: 31.8mm
- Bar Reach: 80mm
- Cable Routing: Internal
- Bar Drop: 125mm
- Flare: 4

$219.99
- Full UD carbon construction
- 31.8mm clamp diameter
- 9-degree back sweep
- EN-Mountain safety certification
- 200g
- Width: 760mm/780mm
- Rise: 0mm/7mm
- Upsweep / Drop: 4-degree
- Back Sweep / Bend: 9-degree

$219.99
- Full UD carbon construction
- 31.8mm clamp diameter
- 9-degree back sweep
- EN-Mountain safety certification
- Upsweep / Drop: 4-degree
- Back Sweep / Bend: 9-degree
- 200g

$180.00
For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon.
It’s light… Like, 185 grams light.
But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment.
- Material: High modulus carbon fiber
- Width: 780mm, includes cut marks to customize width
- Rise: 0mm or 20mm
- Upsweep: 6 degrees
- Backsweep: 8 degrees
- Clamp Diameter: 35mm
- Weight: 185g

$118.00
This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward.
- Distinctive Zipp cosmetics
- 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion
- 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods
- Ergonomic top with 3° backsweep
- Lifetime warranty

$111.99
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.

$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength

$109.99
- Alternative flat bar design
- Offers multiple hand positions for improved handling, power output, and ergonomic comfort
- 6061-T6 Tubular alloy construction
- 120mm of additional reach with hands on the front bar in an aero position
- Great for touring and multiple off-road use applications
- Lots of bar space for accessories
- ISO-Mountain safety certified
- Clamp Diameter: 31.8mm
- Width : 760mm
- Rise / Reach: 120mm
- Upsweep / Drop: 0°
- Sweep: 15°
- Color: Black
- Finish: Matte

$104.99
The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty.
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated

$99.99
- Aerodynamic integrated Cable Routing (ACR)
- Alloy handlebar is designed for Adventure, Gravel and Cyclocross
- Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics
- Flared drops for better control and clearance when descending
- Stem Clamp Diameter: 31.8mm
- 120mm drop, 80mm reach
- 15° outward bend
- Finish: Bead blasted anodized black
- Weight: 292 grams (420mm)

$99.99
- Gravel adventure/touring inspired off-road drop handlebar
- Double butted AL6061-T6 construction
- 610mm drop width / 460mm top width
- 35º flared drops for improved comfort, control, power, and stability
- Flattened top section for enhanced comfort
- Offers multiple hand positions to address long miles and varied terrain
- Accepts bar end shifters
- ISO-Road/Mountain safety certified

$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)

$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)

$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)

$79.99 - $99.99
Origin-8's Space Off Road II Handlebar is ready to explore the final trail frontier. This radical bar is crafted from lightweight aluminum and features a 50mm sweep and 37.5mm rise. But it's not just for looks — it lets you distribute your weight and hand placement in multiple ways for more control and comfort.

$99.90
- Offers brake positioning of a flat bar with the multiple hand positions of a drop bar
- Great for commuting, tandems, endurance racing, dirt drop riding
- When switching from drops to moustache, go 20-40mm shorter stem extension
- Rigid aluminum construction
- 51.5cm width
- 50mm drop
- 95mm reach
- 26mm clamp

$96.00
FSA's Energy Compact handlebars push aluminum technology as far as it can go. Cutting-edge manufacturing allows us to form and manipulate high-strength 7050 aluminum tubing, varying the wall thicknesses and diameter throughout the bar. There's even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, with stylish polished anodizing on either side of the stem.
- Aerodynamic Integrated Cable Routing (ACR) compatible
- Semi-integrated Cable Routing (SCR) compatible
- Double butted and tapered AL7050
- 34mm Ergo flat top
- 110mm-wide round center section makes it easy to mount accessories
- Bar width: center/center from the handlebar tails
- Outward Bend: 4°

$90.99
FSA's Energy Road is a traditional drop bar made from high-strength 7050-aluminium tubing. The finish is shot-peened and sandblasted on the taped areas for grip. There’s even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories.
- Quad-butted, tapered and shot-peened AL7050/T10
- 120mm wide round center section for mounting accessories
- 4-degree outward bend
- Bar Drop: 150mm
- Bar Reach: 80mm

$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted

$89.99
The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly.
- Aaron Ross signature
- Proven 41-Thermal processed 4130 chromoly
- Multi-Butted, traditional 7/8" crossbar for strength

$89.99
- Gravel racing-inspired off-road drop handlebar
- Double-butted AL6061-T6 construction
- 610mm drop width / 460mm top width
- 35° flared drops for improved comfort, control, power, and stability
- Extended 31.8mm bar bore provides ample room for accessories and clip-on bars
- Offers multiple hand positions to address long miles and varied terrain
- Accepts bar-end shifters
- ISO-Road/Mountain safety certified

$89.99
- AL7050 tubular alloy construction
- 31.8mm clamp diameter
- 800mm width
- 7° back sweep
- ISO-Mountain safety certified
- 310-350g (Depending on rise dimension)

$85.99
Ergonomic off-road drop handlebar great for gravel riding. Extended OS center provides extra comfort and more room for handlebar accessories. Multiple riding positions give you more options for long miles in the saddle.
- Double butted AL6061-T6 construction
- 620mm drop width / 480mm top width
- 40-degree flared drops for improved comfort, control, power, and stability
- Accepts bar end shifters
- Clamp Size: 31.8mm
- Width / Length: 620mm
- Rise / Reach: 76mm
- Upsweep / Drop: 110mm
- Back Sweep / Bend: 5-degree
- Material: AL6061
Page 1 of 4
Next page